Electronics

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration

Accurate, reliable, comfortable and connected, the Wahoo TRACKR HEART RATE monitor offers athletes everything they need from a heart rate sensor to take their performance to the next level.

The M16 Central Motor series possesses a simple frame interface, integrated design and is compatible with several different battery types. Designed to hold the superior riding characteristics of a bracket motor with the competitive price of a hub-motor, the M16 series types are compatible with coaster breaks and equipped with an integrated RPM sensor and controller, making it ideal for entry-level riders. All M16 series Motors are provided with LogiX technology based on CAN bus. Weight: 3.90 kg Max. torque:65 Nm Output: 250 / 350 W

Adapter for mounting wheel sensors on Sun Seeker and other tadpoles Fully adjustable, mounts to steering tab Lightweight aluminum construction

Wireless ANT+ speed transmitter for SIGMA ROX 10 and all other ANT+ compatible devices. * Note: GPS Stem/Handlebar Mount sold separately

Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

Replacement Charger for ALL Serial 1 (Harley Davidson) Ebikes.

The 706Wh lithium-ion battery is integrated into the lower frame for sleek style and convenient removal for off-the-bike charging. Depending on terrain, the RUSH/CTY Speed has a range of 25-115 mi/40-185 km and takes just 7.5 hours for a full charge. Battery 40 Cell / 706Wh 19.6Ah Spare/Replacement OEM battery direct from Serial 1. Pro Tip: You will need to charge the battery every 2-3 weeks weather you ride the bike or not. There is an onboard GPS tracking system that uses battery even when the bike is in storage. Not charging the battery regularly may result in totally depleting and damaging the battery. Removing the battery from the bike may reduce how often you need to charge it.

Whenever and wherever your adventure takes you, it's sure to be one you embark on with your smartphone. The Cruzen Universal Bike Mount is the most complete mounting solution for attaching a smartphone to your bike on the market. Whether you're bombing mountains on your downhill bike, CRUZEN the boardwalk on your beach cruiser or running with your jogger/stroller, the X-Grip handlebar mounting kit is guaranteed not to disappoint. But don't take my word for it. - Bar Mount - Stainless Steel Hardware - Cruzen Logo Friction Pad - 2 Spare Replacement Tips - Circular Rubber Spacer - Rubber Shim for thinner bars - Tether: For use on rough terrain.

Connect your PC to CycleOps VirtualTraining.

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

For use with SRAM eTap and eTap AXS drivetrains. When you need a lot of AXS batteries charged in a hurry, the Four Battery Charger is the tool you want USB-C interface for improved conductivity and broad compatibility 60 minute charge time for four batteries, faster for one or two Fast charging feature gets batteries to 75% extra quick Benchtop or wall mountable design Batteries sold separately

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

The fastest and most versatile solution for mounting your mobile phone on your bike. SPC Universal Phone Clamp included. Secure mobile phone mounting on SP Connect mounts with a simple 90° rotation. Suitable for oversized smartphone models and rugged cases. The SP ConnectTM Universal Phone Clamp Max fits almost any mobile phone and holds it securely. You can use it to attach your phone to the motorcycle, bicycle, in the car and for many other activities. No matter what you have in mind: you are ready for your next adventure. Attaching this holder to your mobile phone model is very easy and quick. Simply pull out the crown, screw it tight and fix the crown by pushing it back in. Finished. The Universal Phone Clamp Max is toolless adjustable and is suitable for mobile phones with a width between 65 - 89.5 mm (2.56 – 3.52 inches). Also a perfect solution if you use several mobile phones.

When chasing the next best time, every gram counts. With the Handlebar Mount Pro, you get a feather-light smartphone mount for your SP ConnectTM Phone Case on the racing bike handlebars. Thanks to the stable lightweight construction made of CNC-milled aluminum, the Handlebar Mount Pro is the perfect solution for performance-oriented racing cyclists. So you always have your sports app in view and keep the weight as low as possible when mounting the mobile phone. Robust smartphone holder for road bikes Lightweight construction for maximum performance CNC machined from aircraft grade aluminium Mobile phone and light / action camera can be mounted simultaneously

Discover a flexible and secure solution for every day with the Micro Bike Mount to fix your SP ConnectTM Phone Case on the bike. After just a second you're ready to go. The Micro Bike Mount can be mounted on the handlebars or stem and offers your cell phone maximum stability while riding. Whether navigation system, messenger or apps like Strava: From now on you are always up to date. Flexible mobile phone attachment to the bike Mounting and alignment without tools Mobile phone can be fixed in portrait or landscape format Navi and apps directly in the field of vision

Looking for an intuitive and safe solution to mount your SP Phone Case and mobile phone on the bike? Found. With the Micro Stem Mount you are well equipped for your rides. The Micro Stem Mount offers a particularly flat mounting option on the handlebar stem of your bike. Pin your smartphone in just a second - perfect for navigating, accessing messages or playlists on the go. Attachment to the stem of your bike handlebars Particularly flat mobile phone mounting with headset cap Lightweight aluminium mount Navi and apps directly in the field of vision

Secure mobile phone mounting on SP Connect mounts with a simple 90° rotation. Suitable for oversized smartphone models and rugged cases.

So that you always have everything important in view on the trail: The SP ConnectTM Stem Mount Pro is the ideal solution for attaching your cell phone to your mountain bike. Simply install the bracket inconspicuously in place of the stem cap and you're ready to go. Depending on the orientation of the holder, you have the option of fixing your mobile phone in landscape or portrait format. This gives you access to your apps, playlists and route at all times. Get in the saddle! Mounts to the handlebar stem of the mountain bike CNC machined from aircraft grade aluminium Mobile phone can be fixed in portrait or landscape format Robust stainless steel screws

A universal bike mount that has it all: With the Universal Bike Mount you can enjoy maximum flexibility when installing your SP ConnectTM Phone Case. Whether on the handlebars or stem: Use the Universal Bike Mount on your city bike, racing bike, trekking bike or mountain bike. All options are open to you. From now on you have access to your navigation device and the most important apps at any time, even when you are on the go. Flexible mobile phone attachment to the bike Tool-free attachment to bicycle handlebars or stem Mobile phone can be fixed in portrait or landscape format Arm for angle adjustment

The SP ConnectTM Universal Phone Clamp Max fits almost any mobile phone and holds it securely. You can use it to attach your phone to the motorcycle, bicycle, in the car and for many other activities. No matter what you have in mind: you are ready for your next adventure. Attaching this holder to your mobile phone model is very easy and quick. Simply pull out the crown, screw it tight and fix the crown by pushing it back in. Finished. The Universal Phone Clamp Max is toolless adjustable and is suitable for mobile phones with a width between 65 - 89.5 mm (2.56 – 3.52 inches). Also a perfect solution if you use several mobile phones. Suitable for large smartphones or cases with a maximum thickness of 14.5 mm (0.57 inches). Quick and secure locking system

Need a power boost for your phone? With the compact SP ConnectTM wireless power bank, you can charge your smartphone's battery quickly and conveniently wirelessly when you're on the go. The power bank scores with an output of 10 watts and a capacity of 5.000 mAh and can be stowed in any pocket thanks to its handy design. Connect your SP Phone Case and smartphone simply with the tried-and-tested twist-to-lock Mechanism with the wireless power bank and the energy is already flowing - without a charging cable. When the power bank is empty, it can be quickly recharged via USB. The USB-C In & Out port can also be used to charge devices. The best power bank with your SP Phone Case. Powerbank for wireless charging on the go Inductively charge your phone with the SP Phone Case Convenient and handy pocket size USB-C In & Out - charge your Powerbank or devices

Extend Your Range in the Backcountry. Charge your electric bike from the campsite, treestand, or trail with the Solar Charging Station and get back to your ride! Extend your range with the Solar Panel charger without an outlet! The eBike charging panel connects directly to the bike battery for maximum efficiency. Set up the panel while you sit in your deer stand, spend time on the water fishing, or while hanging out at the campsite. The charge time is roughly the same as charging from a traditional outlet, as long as the panel is in direct sunlight. Carry the panel easily in the included bag, which fits nicely into any of the QuietKat Pannier Bags for easy transport. Do not attempt to use in temperatures below freezing as it can cause permanent damage to the battery. Do not attempt to charge the battery while operating the bike. - Full Dimensions: (L/H): 52" x 36" x .25" - Packed Dimensions: 12.5" x 8.25" x 3.25" - Max Power Output:150 watts - Compatibility: 2020-22 QK E-Bikes VERIFY COMPATIBILITY BELOW: - 2020-22 Apex 750w / 1000w - 2020-22 Ranger 750w / 1000w - 2020-22 Warrior 750w / 1000w - 2021-22 Villager 500w - 2021-22 Ripper 500w - 2021-22 Ranger 5.0 - 2020-22 Jeep - 2020-22 RidgeRunner NOT COMPATIBLE WITH LEGACY QUIETKAT E-BIKE MODELS FROM 2014-2019

QuietKat Replacement Controller for 1000W Hub Drive Motor. With metal ring on motor connection. FKP-QK-CON-1000-20

This is a replacement analyst for Hub-Drive QuietKat Ebikes. View battery level, speed, riding mode, and watts easily.

QuietKat Replacement Controller for 1000W Mid Drive Motor.

QuietKat Replacement Controller for 750W Mid Drive Motor.

QuietKat OEM Replacement Battery Charger (3 Pin) 54.6V~2.0A Charger Not Compatible with Legacy QuietKat E-Bike Models from 2014-2019 or Select 2020/2021 Models Compatible with the following QuietKat E-Bikes: 2020 Apex 750W & 1000W (Not Compatible with 1500W Model) 2020 Ranger 750W & 1000W 2020 Warrior 750W & 1000W

Ride an additional 40 miles on your electric mountain bike with a spare QuietKat pathfinder battery! Our 11.6 ah rechargeable Lithium-Ion battery is at the forefront of green energy technology, with high-quality lithium-ion cells made by Panasonic. Weighs only 7 pounds Rated for 800 charge cycles, or approximately 16,000 miles High-quality lithium-ion Panasonic cells Ride up to an estimated 40 miles per charge Verify Compatibility Below: *2020/21 Apex 750w / 1000w (Not Compatible With 1500w) *2020/21 Ranger 750w / 1000w *2020/21 Warrior 750w / 1000w

The Quad Lock Bike Mount is the lightest and strongest iPhone bike mounting system on the market, compatible with all Quad Lock Cases and the Quad Lock Universal Adaptor for Android and other small devices Patented Quad Lock dual action locking mechanism secures your Quad Lock™ equipped device be it an iPhone, Android or even a GoPro to your MTB, road bike or motorbike Includes silicone bands and zip ties for a removable or semi-permanent manout Compatible with tube sizes 25 to 40mm

Suits handlebar sizes 31.8mm, 25.4mm and 22mm Black anodised CNC aluminium mounting arm Stainless steel hardware Compatible with Quad Lock® Action Cam Adaptor Compatible with all Quad Lock® cases and the Universal Adaptor

The Out-Front Mount positions your phone for easier viewing as well as providing improved aerodynamics (Requires Quad Lock case) The mount can be flipped to attach over the stem which is ideal for Mountain Bikes and short or unusually shaped stems Heads up position provides better viewing angle Secure dual stage lock (Patented) Suits handlebar sizes 35mm, 31.8mm, 25.4mm and 22mm Compatible with all Quad Lock cases

The HandleBand Universal Smartphone Bar Mount allows you to securely attach even the largest smartphones, with or without cases, to a handlebar so that you can easily see and access your devices while riding, walking, or running. Made from lightweight expandable silicone with an aluminum base at its core, the single band securely wraps around nearly any sized bar - including bicycles, jogging strollers, and shopping carts. The split-strap design holds phones securely while making it easy to see your maps, apps, and more. It can be positioned wherever you want, attached and removed as often as you need, and is designed to allow full functionality of your smartphone while it's in place. View maps, talk to Siri, use your training apps, or video camera - or even use your phone as a bike light at night - all while keeping your smartphone safe and accessible. The flexible nature of silicone gives the HandleBand the capability to secure and wrap other objects, too (like flashlights or bike pumps) for functionality that fits your lifestyle. Simple, versatile, and with a streamlined design, the HandleBand is the perfect way to stay connected on even the longest rides. And as a bonus, it functions as a bottle opener, too! Universal design fits nearly every smartphone, including plus-sizes, with or without a case Easily attach and remove smartphone without removing HandleBand from the bar Split Strap allows for screen visibility and accessibility Fits most bar diameters in either horizontal or perpendicular configuration Simple, robust design holds your device securely, even during off-road riding Aluminum base piece functions as a convenient bottle opener If theft prevention of HandleBand is a concern, the unique base piece is designed so that it can be secured to your handlebar with zip ties or cable ties

- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

CHARGER, 24V1.5A SLA,, XLR-3, Smart Std Monster Scooter Parts

Fahrer Akku Ebike battery covers are constructed of high-quality 4.5mm thick neoprene which offers insulation to help extend battery life in colder weather, and protect Ebike batteries from scratches and impacts. Battery covers help maintain working internal temperature. For best results, store and charge batteries indoors. Battery covers help maintain working internal temperature. For best results, store and charge batteries indoors

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Designed in conjunction with Bosch, the K-EDGE Kiox Mount is CNC machined for a lightweight and rock-solid platform for your Bosch Kiox head unit. CNC machined 6016-T6 aluminum Not compatible with Kiox 300 or Kiox 500 Fits 31.8 mm round handlebars Precision fit for the current Bosch Kiox electronics and magnetic locking system One bolt, hinged handlebar mounting system Carbon handlebar safe Dimensions: 11 × 20 × 4 cm Weight: 45 g Lifetime Warranty Made in Boise, Idaho USA

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Battery terminal RMB replacement part.

Horizon Fitness Bluetooth 4.0 & ANT+ Technology Compatible with numerous Fitness Apps Dual band mode heart rate monitor with comfortable and flexible chest strap Connects to Smart Phones, Computers, or GPS Watches using ANT+ or Bluetooth 4.0 technology. Replaceable coin cell battery lasts up to 10 months. Compatible with most apps including: Peloton, Zwift, Strava, Endomondo, Sports Tracker, Runtastic, Wahoo Fitness, Garmin

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

Giant's Axact 6 is a simple way to get the most out of your rides. It tracks six essential functions, including distance and speed on a large, easy-to-read display. The wired sensor and handlebar mount attach easily to your bike, and a simple low battery indicator lets you know when its time to open the easy coin-release cap to change it. Digital Speedometer / Computer

Giant's Axact 9W is a great way to get the most out of your rides. This wireless computer keeps you bike clutter-free and tracks nine essential functions, including distance and speed, with its large, easy-to-read display. The Axact also features a low battery indicator so you know when its time to open the easy coin-release cap and replace the battery. Digital Speedometer / Computer

GNT Computer Extension Mount GoPro Attachment Bracket Product description - Giant computer extension mount GoPro attachment - Nylon construction - Hardware included - Fits the following GPS mounts: 2018+ Propel Computer Mount 2018+ Alloy Out-Front GPS & GoPro Mount for Round Bar Nylon Out-Front GPS Mount For Round Bar

EnergyPak Plus Accessory: - The EnergyPak Plus accessory includes a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use. - Anti-theft design. - The Energypak Plus Accessory kit is required to mount the Energypak 250 auxiliary battery on the bike.

Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet

Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet