Pumps/Inflation

- Easy-to-read 2.5" raised gauge - Durable steel barrel and base - Ergonomic handle with ball inflation accessory storage - AutoHead™ with anodized alloy accents and pressure release button - 160psi rating

LESS IS MORE. The Giant Control Tower 2 is a great pump choice. A durable structure provides stability during use, remove the surplus function provides better efficiency with fewer strokes to fill your tires. The proven AutoHead is compatible with most common tire valves and the large 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3.0" base mounted analog gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180psi rating

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

Inflating up to 120psi and handling both Presta and Schrader valves, Control Tower 4 is constructed with a reinforced composite barrel and plastic base. With an ergonomic handle it comes fully loaded with a ball needle and inflator for a practical, multi purpose pump. - DoubleHead valve - Ball inflator accessories included - Plastic barrel and base - Durable steel shaft

TOTAL INFLATION SOLUTION. With the all-new Giant Control Tower Boost, featuring a fully integrated 200psi tubeless inflator chamber alongside the standard inflation chamber, you can get the air you need to seat and inflate any tubeless tire on any wheel and still have the functionality of a standard floor pump.

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose

The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a stand-alone tire pressure gauge. - Magnetic quick-connect interface - Hidden hose stores neatly in the body of the pump

- Magnetic hose attachment - Hidden hose in the body of the floor pump - Quick connect for gauge to be mounted to pump - Hose is magnetically held inside the pump - Tripod base for added stability - 160 psi / 11 bar - Universal head for presta / schrader (fully threaded presta valve bodies only) - Large, accurate analog gauge

The high-pressure portable hand pump with hidden magnetic hose and Co2 adaptor. Details - Premium pump with flexible rubber hose to allow for easy inflation - Features include a concealed co2 inflator head (Presta only), magnetic head with twisting collar, a folding and locking handle and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - Hp (high pressure) version recommended for tires 45c and narrower - All klic pumps come with a bottle cage bracket mount Specs - Length: 220mm - Pressure: 120psi/8.3 bar - Warranty: 5 years - Weight: 115g (pump only)

Crank Brothers Klic HP Gauge sports a revolutionary design with a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-pressure portable hand pump with hidden magnetic hose and pressure gauge - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! - Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HP (high pressure) version recommended for tires 45c and narrower. - All Klic pumps come with a bottle cage bracket mount. - Length 260mm - Pressure 120psi / 8.3bar - Weight: 142 grams

Crank Brothers Klic HV Gauge features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-volume portable hand pump with hidden magnetic hose and pressure gauge - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! - Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HV (high volume) version recommended for tires 1.8” wide and larger. - All Klic pumps come with a bottle cage bracket mount. - Pressure 110psi / 7.6bar - Weight: 150 grams

The high-volume portable hand pump with hidden magnetic hose, pressure gauge, and co2 inflator. Details - Flexible rubber hose hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include an air pressure gauge, concealed co2 inflator head (Presta only), magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - HV (high volume) version recommended for tires 1.8" wide and larger - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 110psi/7.6bar - Warranty: 5 years - Weight: 186g

Crank Brothers' Sterling SG Pump features a tough aluminum barrel a little shy of 8 inches long for maximum pumping power; a switch to select high-volume (off-road tires) or high-pressure (road tires) inflation, and a handy built-in gauge. The universal head gets up to 100psi on either Schrader or Presta valves without having to switch the head.

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Mounting Kit for Mountain Morph and Turbo Morph G.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.