Parts & Accessories

Replacement Sunlite trailer hitch

Keep your little one safe and cozy while strolling or jogging with the Baby Snuggler.

Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation

Burley's adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. These thru axles have an external male threading on the end to accommodate the installation of Burley's axle mounted hitch system.

Ensure your trailer is ready to roll whenever you are with the Trailer Storage Cover.

This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.

• Used to retrofit new style hitch to older 12mm style • Must be combined with 1st knuckle from 15mm horizontal hitch

Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.

Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.

Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.

Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.

Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy

This is our Excellent Adventure Thru-Axle. It upgrades your bike's rear end for hauling cargo trailers, should you feel like taking Rufus along on your errands. Extensive product testing with our Bill and Ted Trailers provided an "awesome experience," but time travel remains a risky endeavor. Designed for use with slotted horizontal or vertical single-position dropouts, the Excellent Adventure Axle is compatible only with 12 x 148mm hubs. Compatible Surly models include Skid Loader, our compact electric cargo bike, as well as Karate Monkey, Krampus, Grappler, Ogre, Lowside, ECR, and Troll. Once again, the 12 x 148mm hub requirement cannot be overstated. Visit your local Surly dealer to discuss other scenarios you may have in mind. - 12 x 148mm hub compatibility only - Designed for use only with Surly's Bill and Ted Trailers - Works with slotted horizontal or vertical single-position dropouts

Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)

Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts

A skewer for your Surly Trailer.

Surly Trailer Parts

- Bolt-on Axle Adapter

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The Robert Axle Project QR Hitch Adapter is a high quality, finely machined hitch adapter for towing single-arm trailers on bikes with 5mm quick release rear axles. Our stainless steel, QR Hitch Adapter helps trailer hitches fit more bikes, easily clearing hooded and interfering dropouts. Easy to install, by simply replacing the QR nut. Our adapter uses a 5mm hex to ensure your hitch and pre-cious cargo are more securely attached than other knurled adapters. The 5mm hex also isolates and protects dropouts from marring and over-tightening of the quick release when installing the hitch.

Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.

Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub

The Burley Ballz Nutted Axle Adapter includes a set of threaded Ballz that replace the nuts on your current nutted axle, enabling compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with nutted axles. - Official Burley Ballz adapter for bikes with nutted axles - Two Burley Ballz that thread onto the existing nutted axle - Quick and easy one-time installation - Specially designed for use with the Coho XC

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC