Accessories/Parts

Protect your rides

The new Trike Adapter TRK-E20 can be used on the Sport Rider for Electric Bikes. It is an adapter that allows users to carry one E-trike and one E-bike. For use on a 2" (Class III) hitch only. Do not use a 1-1/4"-2" adapter Not to be used on any RV, Travel Trailer, 5th Wheel or towed vehicle Not to be used with any hitch extender Not to be used with a bike cover

20-24" Wheel Adapter 2.0 - Sherpa 2.0, NV 2.0, Add On 2.0, NV 2.0 BASE

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Thru-axle adapter for the Kuat TRIO rack.

Piston Fender Strap Kit

Küat Hitch Adapter 2.5" to 2"

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Ensure the utmost security for your Kuat Piston 2" bike rack with the Kuat Hitch Lock V4 2". Specifically designed for use in combination with the Kuat Piston 2" bike rack, this hitch lock provides reliable protection and peace of mind during your outdoor journeys. Locking hitch pin for Kuat Piston Designed for use with 2" version only

Hitch Lock V4 - Includes hitch pin, lock, and 2 keys - For locking hitch rack to car

Ensure the utmost security for your Kuat Piston 2" bike rack with the Kuat Hitch Lock V4 2". Specifically designed for use in combination with the Kuat Piston 2" bike rack, this hitch lock provides reliable protection and peace of mind during your outdoor journeys. Locking hitch pin for Kuat Piston Designed for use with 2" version only

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

Piston Pro X License Plate Mount relocates your plate to the end of the rack ensuring compliance with applicable laws.

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Piston E-Bike Ramp

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Kuat Huk tailgate pads use fully welded durable TPU that is smooth to the touch, while also being extremely durable and strong. Bonus: recyclable and biodegradable. Each size is designed with an innovative tailgate window that allows backup camera visibility and tailgate handle access without removing the tailgate pad. All are securely held in place with sturdy nylon straps. - Welded seam construction with soft-touch backing - Extra 1” padding on truck pad top for extra cushion where you need it most - Metal G-Hook buckles for a fast and secure hold - The roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free

The fully welded durable TPU (Thermoplastic Polyurethane) is smooth to the touch, while also being extremely durable and strong. Bonus: recyclable, and biodegradable. Each size is designed with an innovative tailgate window that allows backup camera visibility and tailgate handle access without removing the tailgate pad. The full-size tailgate pads hold up to six bikes, the mid-size tailgate pads hold up to five bikes, and the half-pad holds up to 2 bikes. All are securely held in place with sturdy nylon straps. We’ve even designed a version for those tricky, curvy tailgates. Curious about what size tailgate pad will work with your truck? Check out our handy tailgate pad comparison chart here. Transports up to 5 bikes Welded seam construction Bomber TPU (Thermoplastic Polyurethane) Soft touch backing protects your truck’s paint Extra 1” padding on the truck pad top for extra cushion where you need it most. Metal G-Hook buckles for a fast and secure hold Roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free Fits mid-size trucks with tailgates from 54” + wide 3-year warranty

Kuat Huk tailgate pads use fully welded durable TPU that is smooth to the touch, while also being extremely durable and strong. Bonus: recyclable and biodegradable. Each size is designed with an innovative tailgate window that allows backup camera visibility and tailgate handle access without removing the tailgate pad. All are securely held in place with sturdy nylon straps. - Welded seam construction with soft-touch backing - Extra 1" padding on truck pad top for extra cushion where you need it most - Metal G-Hook buckles for a fast and secure hold - The roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free

Kuat Huk tailgate pads use fully welded durable TPU that is smooth to the touch, while also being extremely durable and strong. Bonus: recyclable and biodegradable. Each size is designed with an innovative tailgate window that allows backup camera visibility and tailgate handle access without removing the tailgate pad. All are securely held in place with sturdy nylon straps. - Welded seam construction with soft-touch backing - Extra 1” padding on truck pad top for extra cushion where you need it most - Metal G-Hook buckles for a fast and secure hold - The roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free

Kuat Huk tailgate pads use fully welded durable TPU that is smooth to the touch, while also being extremely durable and strong. Bonus: recyclable and biodegradable. Each size is designed with an innovative tailgate window that allows backup camera visibility and tailgate handle access without removing the tailgate pad. All are securely held in place with sturdy nylon straps. - Welded seam construction with soft-touch backing - Extra 1” padding on truck pad top for extra cushion where you need it most - Metal G-Hook buckles for a fast and secure hold - The roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

Piston X Add On LED Dual Ratchet Platform Rack with Kashima

Pair of Heavy Duty Cinch Straps for Securing E-Bikes and Bikes to Transport Racks Our 1" x 20" Heavy Duty Cinch Straps with Metal Ring are perfect for securing your e-bikes and regular bikes to transport racks on motor vehicles. Made from durable polyester webbing and featuring a strong hook-and-loop nylon material with a premium stainless steel ring, these straps ensure a secure hold. Key Features: ++ Optimized for E-Bikes: Designed to keep e-bikes stable during transport. ++ Fat Tire Compatible: Suitable for bikes with 4"+ fat tires. ++ Durable Materials: Constructed with tough polyester webbing and a high-quality stainless steel ring for superior strength. ++ Reinforced Stitches: Provides extra strength and durability. ++ Convenient Size: One size fits most needs. Specifications: Length: 20" Loop Part: 16.5" Hook Part: 3.5" Circumference Capacity: 9.5" - 17" Note: Always follow the manufacturer's directions for loading and securing bikes. These heavy-duty cinch straps offer a reliable and reusable solution for transporting your bikes safely.

Double the Carrying Capacity for your Pivot Pro Vehicle Hitch Rack Increase your Pivot Pro Vehicle Hitch Rack’s capacity and haul up to two fat tire electric bikes safely, easily, and securely. The easy-to-install add-on tray allows you to carry an additional electric bike or standard bike using your QuietKat Pivot Pro Hitch Rack. By adding an additional add-on rack to your Pivot Pro, you can carry two electric bikes at one time. *DO NOT OVERLOAD. MAX CAPACITY IS LIMITED TO 100 LBS PER TRAY.

Specialized wheel holder that adapts MHS DUO for fenders and mudguards. A Wheel Holder for Your Fender: Ensure the MHS DUO tray can transport any type of bike. The MHS Fendered Wheel block holder expands the MHS DUO compatibility to a wider range of bikes including those with front or rear fenders, mudguards, and specialized eBike frames. Simply swap out the existing DUO arm wheel holder on each arm that will secure a wheel with a fender or mudguard. The MHS DUO Fendered Wheel Block Holder holds the wheel below the fender and can be adjusted to fit a variety of bike architectures.

Long Wheel Replacement Straps (2 Pack)

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.

Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.

Safety First! Avid cyclists and trail hunters value safety. MHS Lighting ensures you are street-legal while using any MHS configuration. Install the MHS Lighting on any MHS Base to ensure rear vehicle lights remain visible for any possible scenario. A 4-Flat pin connections provides power to a set of DOT certified powerful LED lights with full vehicle OE (brakes, turn signals, hazards, and taillights). Powerful LED taillights, DOT / FMVSS108 compliant, full brake, turn signal, and hazard light functionality. Wiring designed to fit within MHS Base to keep wiring out of the way. For MHS Base only - two component lighting system designed to be installed on any MHS Base. Can remain installed while MHS System or vehicle is not in use.

Roll and Ride Designed with the eBike enthusiast in mind, the MHS Ramp makes heavy lifting and awkward bike loading a thing of the past. Simply connect the American-made ramp to any MHS DUO tray and roll your ride into position with minimal effort. Once bicycles are loaded, collapse and stow the ramp for storage – and save your energy for the adventure ahead. Bike ramp for MHS Duo tray style hitch rack configurations. Easily roll bikes (up to 100 lb.) onto any MHS Duo tray, eliminating heavy lifting. Stow and go with the MHS Ramp’s folding design. Ideal for heavy bicycles, including eBikes. Built with durable American-made steel.

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Upgrade your SuperClamp rack to tilt or fold for tighter storage and bike-on hatch access. Also, take your 4-bike SuperClamp down to a 2-bike version for a compact lightweight option.

Transform your 4-bike Freedom or SuperClamp hitch rack into a 2-bike plus cargo carrier. Constructed with steel sourced from America’s heartland, this durable cargo rack can haul 120 lb. of gear and features integrated tie-down points, tilting capabilities and fast installation. Simply swap the Cargo Accessory for the 2-bike bar closest to the vehicle for an easier way to haul it all.

Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.

A modular two-bike platform hitch rack for 2" hitch receivers that’s fully locking, eBike friendly and expandable to 3 bikes with optional add-on tray. What's Needed to Build Your Bike Rack: 2 Bike Rack: MHS 2-Bike Package 3 Bike Rack: MHS 2-Bike Package and a DUO 1-Bike Add-On Tray. Where Style Meets Substance The difference between pros and regular folks boils down to some skill, some luck and 100% style. Drawing inspiration from those who know how to stick the landing with swagger, the MHS 2+1 is all that with more to come. Sporting the same highly designed, modular trays as the 1- and 3-bike version, the MHS 2+1 lets you switch your hitch to transport anywhere from one to three bikes. Capable of handling a range of bikes, the MHS 2+1was designed to carry some of the biggest bikes around. We’re talking 80 lb. eBikes, big hit whips with 53” wheelbases, and bikes with wheels ranging from 20 to 29 inches. No matter your style of ride, dual-arm wheel holders securely move bikes down the road without touching the frame, while integrated locks protect the bikes and rack. Plus, tool-free wheel adjustments make it easy to swap out rigs or lock in a friend’s on the way to the trail. Modular Hitch System: a future-proofed modular system featuring hitch bases with removable bike trays and Add-On capabilities. Duo: Dual-arm holders feature tool-free adjustment and are compatible with a wide range of tire sizes without touching the bike’s frame. Add a Bike: carries up to 2 bikes, 80 lb each, and can be expanded to transport three bikes with DUO 1-Bike Add-On Tray. Full Tilt: tilting feature allows easy hatch access without removing the bike. Complete Integrated Security: locks the rack to the car and the bikes to the rack. Designed to be used with 2” hitch receivers only.

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter

Adapt your Swagman G10/E-SPEC platform hitch rack (sold separately) to accommodate fat bikes with wheel trays that fit wide tires. - G10 Fat Bike Wheel Holder (set includes 2 wheel trays)

The Swagman Ramp & Bridge makes loading heavy bikes a breeze! The telescoping ramp rests on the Swagman E-Spec, Current, or G10 allowing you to roll your bike up the ramp and into the wheel trays. The bridge rests between wheel trays, making it easy to finish rolling your bike into position before securing it with the ratchet arms of the bike rack. When not in use, the ramp shortens and the bridge nests on top for easy storage. This Ramp & Bridge (66690) is compatible with the E-Spec, Current, and G10 bike racks. Maximum Weight Capacity: 80 lb

The Swagman Ramp & Bridge makes loading heavy bikes a breeze! The telescoping ramp rests on the Swagman Skaha Series or Escapee (2022 Escapee model onwards) allowing you to roll your bike up the ramp and into the wheel trays. The bridge rests between wheel trays, making it easy to finish rolling your bike into position before securing it with the ratchet arms of the bike rack. When not in use, the ramp shortens and the bridge nests on top for easy storage.

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Replacement ratcheting cradle straps (for 2 bikes). - Replaces ratchet style straps on Thule Apex XT, Thule Helium Pro, Thule Camber, and Thule Range - Contains six ratchet style straps (four cradle straps and two anti-sway)

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.