Parts & Kits

These Li-ion batteries are our longest lasting E-Bike battery with an expected 500-800 life-cycles (from full to empty).

Convert your Sun Baja Trike to Electric! Includes: Locking Parking Brake Levers 4-to-1 Accessory Cable (for connecting 2 brake levers) Throttle with Reverse 24" Fat Tire Wheel (built with rear direct-drive motor for use in 135mm front fork) Available with no battery for customers that want to use their own 36v or 48v battery. No Hazmat fee is charged when shipped without a battery. E-TrikeKit Adult Tricycle Conversion Kit with Heavy-Duty (Low Speed / High Torque) 500w Direct Drive Hub Motor 48 Volt Li-ion Battery Pack and Charger The E-TrikeKit electric tricycle conversion kit with a 48v lithium battery pack is specifically made with increased pulling power for heavier adult tricycles. The direct-drive hub motor is designed to deliver more low-end torque and a lower top speed; important for safety on a 3-wheeler. This premium system with a lithium battery gives high-end performance and longer overall battery life. Who's it for? This kit is built specifically for upright adult tricycles. The heavy-duty direct-drive motor is designed for increased torque and a lower top speed. This kit also has a speed-limited reverse (30% of forward top speed). The E-TrikeKit is designed specifically for adult tricycles. Upgraded in 2015 to include our LCD dashboard display, 48v 12FET controller, speed-limited reverse function, and locking e-brake handles, the system is easy to install and operate and gives the rider total control over top speeds and power output. This trike specific conversion kit allows you to turn any conventional 3-wheel adult tricycle into an electric-assisted adult mobility tricycle. System Specs Watts (Nominal/Peak): 500w / 750w (EBK 22Amp Controller) Top Speed: Approx. 14 Mph @ 48v in 26" Wheel (4 mph reverse) Range: 9-42 Miles (Based on rider's weight, input, and terrain contingent Charge Time: 3-5 Hours (From 0-100% and depending on battery choice) Weight: 5.8 lbs / 9.7 lbs / 14 lbs Performance: High Efficiency: Medium Stealth Factor: Low

E-BikeKit Front 500-1000w Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions New Programmable LCD. The E-BikeKit is designed for convenience, performance, and reliability. With an LCD dashboard control panel and 48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36v and 48v battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit. Your choice of battery. Motor Specs: Type: Internally Geared (brushless, and disc brake compatible) Power: 500w Nominal / > 1000w @ 48v Max Torque: 84Nm @ 48v Max RPM: 320 @ 48v Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect Connector: Round 8-Pin 13/32" (10.4mm) Weight: 9.4 lbs (4.26 kg) Warranty: 1 Year (up to 48v - 300 lbs max load) Note: The geared 500w “Performance” motors feature an internal clutch to reduce drag, and can not read speed or mileage when not in use.

E-BikeKit Front 500-1000w Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions New Programmable LCD. The E-BikeKit is designed for convenience, performance, and reliability. With an LCD dashboard control panel and 48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36v and 48v battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit. Your choice of battery. Motor Specs: Type: Direct-Drive (brushless, disc brake compatible) Power: 500w Nominal / > 1000 @48v Max Torque: 46N-m @48v Max RPM: 259 @48v Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect Connector: Round 8-Pin 19/32" (10.4mm) Weight: 12.8 lbs. (5.8 kg) Warranty: 1 Year (up to 48v - 600 lbs. max load)

E-BikeKit Front 500-1000w Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions New Programmable LCD The E-BikeKit is designed for convenience, performance, and reliability. With an LCD dashboard control panel and 48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36v and 48v battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit. Motor Specs: Type: Direct-Drive (brushless, disc brake compatible) Power: 500w Nominal / > 1000 @48v Max Torque: 46N-m @48v Max RPM: 259 @48v Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect Connector: Round 8-Pin 19/32" (10.4mm) Weight: 12.8 lbs. (5.8 kg) Warranty: 1 Year (up to 48v - 600 lbs. max load)