Filter By:
Forks
$14.99
*Note, if you've lost this lever check to make sure you still have the Small Gear with 4 mm hex (part #FKA066-10).
For older model NCX (until SF10), NRX (until SF7) and CR9 (until SF8).
Call or email us if you have any questions.
$16.99
Stanchion Guard Set for GTMark 860 Quietkat Fork
$18.00 - $42.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$19.99
FKE028 18/28 (or FKE-028-86) 28mm,
speed lockout lever 28mm XCT HLO/NEX HLO
also fits XCT30
$24.99
Front Thru-Axle 15mm 205mm Coarse thread For Inverted Suspension Fork.
$27.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$39.99
$44.99
11% Off
Front Thru-Axle Nut and W For Level - Zoom
$39.99
Front Thru-Axle 15mm 195mm Fine thread For Inverted Suspension Fork.
$45.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 165mm steerer length
• Threaded fork
• Compatible with 16-inch wheels
$45.99 - $49.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Axle-to-Crown: 365mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 120mm
- Steerer Length: 200mm
- Steerer Size: 1-inch
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 200mm
- Brake Mount: Caliper
- Axle-to-Crown: 395mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 100mm
$49.99 - $59.99
Economically priced hi-tensile steel MTB fork for 26-inch wheels.
- Steerer Type: Threaded Steerer
- Size: 1" (7/8 ID)
- Steerer Length: 198mm
- Rake: 45mm
- Axle-to-Crown: 393mm
- Race Diameter: 27mm
- Axle: 3/8"
- Thread Length: 95mm
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 137mm
- Brake Mount: Caliper
- Rake: 35mm
- Axle-to-Crown: 315mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 40mm
$59.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm
$59.99
- Brake mounts: Caliper
- Construction: Hi-tensile steel
- Rake: 50mm
- Type: LW
- Steerer type: Threaded
- Race diameter: 27mm
- Axle: 3/8'inch
$59.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
$59.99 - $69.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels
$65.99
- Cantilever brake mounts
- High-tensile steel construction
- Threadless fork
- Steerer diameter: 1 1/8-inch
- Steerer length: 260mm
- For bikes with 26-inch wheels
$69.99 - $79.99
- Cantilever brake mounts
- 45mm rake
- Hi-tensile steel construction
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Brake Mount: Cantilever
- Rake: 45mm
- Axle-to-Crown: 405mm
- Thread Length: 120mm
- Axle: QR 9mm
$69.99 - $79.99
• Cantilever brake mounts
• 45mm rake
• High-tensile steel construction
• Threaded fork
$79.99 - $89.99
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork
$89.99 - $103.99
• Chromoly construction
• V-brake mounts
• Fits bikes with 16-inch wheels
• Steerer length: 250mm
$89.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1 1/8-inch steerer diameter
• Threadless fork
$89.99 - $99.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length
$93.99 - $119.99
• Chromoly construction
• V-brake mounts
• I.S. disc mount
• Fits bikes with 20-inch wheels
• Steerer length: 250mm
$99.99
- Hi-Tensile steel construction
- 135mm fat tire front hub spacing
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Steerer Length: 275mm
- Brake Mount: Is Disc
- Rake: 45mm
- Axle-to-Crown: 450mm
- Race Diameter: 30mm
- Axle: QR 9mm
$99.99
• High-tensile steel construction
• Springer suspension
• Threaded
• 1-inch diameter (7/8-inch inner diameter)
• 20-inch version steerer length: 148mm
• 26-inch version steerer length: 180mm
$99.99
• Cantilever brake mounts
• Chromoly construction
• Threaded fork
• For 26-inch wheels
• 200mm steerer length
$101.99
From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.
$109.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 200mm steerer length
• Threaded fork
$109.99 - $139.99
- Replacement urban threadless forks
- Accepts up to 40mm tire width
- Chromoly construction
- 1-1/8" steer tube
- Size: 700C
- Steerer Type: Threadless
- Steerer Length: 300mm
- Material: Chromoly
- Offset: 45mm
- Axle-to-Crown: 405mm
- Race Diameter: 30mm
- Axle: QR
$110.49
Origin-8's Cromo-Lite Combo Mountain Fork is a versatile fork for your 26-inch wheeled bike. Crafted from 4130 chromoly steel, it provides a compliant ride that's suspension corrected for excellent handling. With disc mounts and linear-pull brake bosses, you're set to mount the brakes you want.
$119.99
• Cantilever brake mounts
• Chromoly construction
• Threadless fork
• For 26-inch wheels
• 250mm steerer length
• 1 1/8-inch steerer diameter
$139.99
Type: Suspension Size: 26"
Steerer Type: Threaded Steerer Size: 1-1/8"
Steerer Length: 210mm Brake Mount: Post Disc/V-Brake
Color: Black Race Diameter: 30mm
Axle: QR9 Thread Length: 55mm
Travel: 100mm
$149.99
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch
$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$159.99
Basic replacement cross country suspension fork
80mm Travel
Coil spring / mechanical lock-out
Alloy lower legs and crown
Steel steerer tube
Oversized 28.6mm stanchion tubes
2050g
$159.99
700C urban touring fork
Steel upper and alloy lowers for strength
50-63mm travel for small bump compliance
$159.99
Basic replacement suspension fork
Coil spring / preload adjust
Alloy lower legs
Steel steerer tube
$159.99
700C urban touring fork
Steel upper and alloy lowers for strength
50-63mm travel for small bump compliance
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$178.49
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.
$179.99 - $329.99
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
- Solo Air spring
$179.99
*Coil spring / preload adjust
*Speed lock out
*Magnesium lower legs
*Canti brake only
*1900g
$179.99
Basic replacement suspension fork
100mm travel
Coil spring / preload adjust
Disc or V-brake
Alloy lower legs
Steel steerer tube
2550g
$179.99 - $209.99
Darkwave fork comes with the 28mm offset our team loves and backed by an unmatched and legendary 41-Thermal lifetime warranty against bending and breaking.
- Legendary lifetime replacement warranty – laboratory tested and team proven
- Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance
- Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race
- Slightly longer steerer tube length for use with taller head tubes and Gyro installations
- Rust-proofed with with a lightweight coating that provides the best anti-corrosion processing that's offered today
- Optimized, 4mm thick dropout shape for grind and peg clearance
- 7075-T6 pre-load bolt with 6 and 8mm hex key slots
- 41 Thermal Processed: Sunday is the only company to use Odyssey's proven and trusted 41 Thermal heat treating. This formula has been refined and improved since the late 90's. The proven 41 Thermal process allows our products to be lightweight AND strong. It is also backed by a legendary lifetime warranty.
$189.99
Basic replacement cross country suspension fork
100mm Travel Coil spring
Mechanical lock-out Alloy lower legs
Crown Steel steerer tube
Oversized 28.6mm stanchion tubes 2050g
$189.99
Coil spring / preload adjust
Speed lock out
Fixed rebound damping
$209.99
Speed lockout
AC4C Series Die cast Crown
30mm stanchion
Post mount disc
$219.99
Coil sprung XC fork with mechanical lock out
32mm stanchion and a magnesium lower to keep the weight down
Adjustable top cap that lets a rider adjust the pre-load of the spring depending on rider weight and desired feel
Travel from 80 - 120mm
$237.99
Upgrade your road rig with Origin-8's Synergy Fork. It features an 4130 chromoly-steel steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.
$239.99
Speed lockout
AC4C Series Die cast Crown
30mm stanchion
Post mount disc
$239.99
E-Bike specific 700c fork featuring a coil spring suspension with Hydraulic Lockout and Preload adjust
Aluminum crown and lightweight steerer
Post mount disc for up to 180mm rotors
$249.00 - $379.99
$249.00 - $379.99
Up to 10% Off
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
$249.99
Upgrade your road rig with Origin-8's Pro Pulsion Synergy Fork. It features an aluminum steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.
$249.99
Entry level BOOST MTB fork with 32mm stanchions and a speed lockout that can be used on-the-fly for climbing.
120mm travel
15x110 Boost spacing
27.5 x 3.0" max tire width
Adjustable preload
Coil spring
Forged aluminum crown and steel steerer
32mm stanchion tubes
Nickel plated finish
Lower aluminum casting
Post mount disc design
$259.99
The RockShox Paragon suspension fork combines the premium level of performance and features mountain bikers have come to expect from RockShox, now with a purpose-built 700c trekking design. Its lightweight, infinitely tunable Solo Air spring and Motion Control damper allow the rider to fine tune the fork for those cherished stretches of either path or pavement. Paragon’s thoughtful design combines a unique light mount on the fork brace and fender and rim/disc specific mounts integrated into the fork legs. Even the dynamo wiring runs under a sleek integrated cover up the fork leg, keeping it safe and concealed. Paragon makes trekking both smart and simple.
- Standard with Motion Control damping featuring low speed compression adjustment
- Integrated mounts for fenders
- Unique light integration at the fork brace
- Integrated wiring and cable management for running a dynamo
- Crown Race: 30mm
- Offset: 46mm
- Steerer Tube Length: 262mm
- Positive Spring: Air
- Negative Spring: Air
- External Adjustments: Rebound Damping , Low Speed Compression Damping
- Maximum Tire Width: 45mm
Page 1 of 3
Next page