Skip to main content
Closed Good Friday 03/29/24. Otherwise Regular Hours, Open Saturday & Monday etc.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$10.99
- Replacement steel quick release skewers
$10.99
• Replacement aluminum quick release skewers
$14.99
• Replacement aluminum quick release skewers
$0.99
- Converts Schrader rims to Presta - Rubber - Sold individually
$24.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
$15.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$110.99
Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm
$89.99 - $127.49
Silver anodized alloy rim w/ 32 holes - KT silver alloy road hub - Stainless steel spokes - QR wheel
$1,049.99
Shimano has brought full carbon wheels to a new level. With a development concept shared with DURA-ACE and ULTEGRA, the new 105 series full carbon wheels offer balanced performance at an attainable price. The C32, with its focus on accelerating and climbing performance, features reduced rotational weight aimed at terrain with punchy steep rises where weight is king. The added benefit of tubeless technology further boost the usability by allowing riders to run relatively low pressures for more comfort and control. And you can't mention tubeless without talking about the reduced risk of flats. On-road, off-road or a combination of both, the C32 wheels are here and ready for the masses. Simple design that can be easily matched to any bike Most affordable Shimano carbon road wheel to date 32mm height full carbon rim profile 21mm internal rim width optimized for high volume road tires (25-32c) Tubeless technology increase comfort and control while reducing the chances of flats Centerlock disc brake Shimano 11 & 12 speed road compatible
$62.00 - $99.99
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
$54.00 - $59.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$599.99
Fits: Ibex, Apex Pro, Jeep, Rubicon Get more out of your favorite electric bike with a 29" swappable wheelset. Designed to get more range and acceleration out of your eBike while tackling less aggressive terrain compared to the standard 26"x4.8" tires.  Install Instructions: Tools required: chain whip, SRAM cassette tool, Torque wrench with a T25 torx bit, isopropyl alcohol, and cleaning rag Slide cassette onto freehub and start threading the cassette lock ring by hand Tighten the cassette lock ring using the cassette tool to ~40Nm Line up the brake rotor with the hole pattern on the hub ensuring that the text is facing outwards. Note that front and rear rotors are the same Insert and start threading in the 6 rotor bolts by hand Torque the rotor bolts to 6Nm using the torque wrench Be sure to clean rotors with isopropyl alcohol before use to avoid contaminating the brake pads Rear dropout/frame may need to flex in or out up to 8mm. (Not included extra brake rotors and cassette. You can use your original parts.)
$229.99
Centerlock hubs on tubeless-ready rims. Includes convertible endcaps for Quick-release and Thru-Axle
$129.99
Quality Wheels WTB ST i23 TCS Disc Front Wheel - 29" 15 x 110mm Boost Center-LockBlack. Blending the versatility and performance of tubeless ready rims with a broad range of axle compatibility makes these wheels a great choice for service or upgrades options. Rims come tubeless taped but can also accommodate tubes and clincher tires without modification. Tubeless ready
$169.99
With 105-level disc hubs and tubeless-compatible DT rims, you're set up for Adventure, Gravel, Pavement, and light-duty Off-road. Tubeless ready. Specifications: Wheel Size: 700c Position: Front Tire Type: Tubeless (Clincher) Brake Type: Disc Brake (Centerlock) Hub: 105-Lever Disc Axle Type: Quick Release Rim: DT Valve: Presta Material: Aluminum
$169.99
Shimano SLX 12-speed Micro Spine rear hub paired to the WTB ST Light i29 rim offers great value to performance for 12-speed SLX, XT, and XTR equipped bikes. 29mm inner rim width offers the optimal setup and performance with today's trail and enduro tires. *Professional tubeless tape installation included *Installed tubeless-ready tape *Center Lock disc hub *Shimano 12-speed Micro Spline *29mm Inner rim width *Cassette Body Type: Shimano Micro Spline *Hub/Brake Compatibility: Center-Lock Disc *ISO Diameter: 622 / mountain / 29" *Rear Axle: 12 x 142mm Thru Axle *Wheel Size: 29"
$99.00
Best value in quick-release disc wheels.
$109.00
Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black
$99.00
Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black
$89.00
If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.
$99.99
If you need just one wheel to stock for on-the-spot repairs, these wheels feature both Rim Brake and Disc Brake compatibility.
$189.99
Designed for E-bike or adventure touring, these wheels are built to withstand heavier loads and greater torque. Built with DT Swiss 13 gauge spokes. 30mm inner width to accommodate 2.4-2.8 tires. 30mm inner width Center-Lock Disc Tubeless Ready Rotor Lock Ring not included E-Bike rated hub E-Bike rated rim 13g Spokes
$24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - 10mm spacer kit adapts 100 x 15mm front hub to 110 x 15mm - Includes 10mm adapter to 6-bolt rotors - Includes external spline lock ring for thru-axle compatibility
$18.69 - $19.99
Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
$7.99
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
$13.59
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
$7.89 - $9.39
- High-quality fat bike rim strips - Super durable PVC material
$229.99
Sturmey Archer 26" inch wheel with 3 Speed hub for Rambo.