Parts & Accessories

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

The M16 Central Motor series possesses a simple frame interface, integrated design and is compatible with several different battery types. Designed to hold the superior riding characteristics of a bracket motor with the competitive price of a hub-motor, the M16 series types are compatible with coaster breaks and equipped with an integrated RPM sensor and controller, making it ideal for entry-level riders. All M16 series Motors are provided with LogiX technology based on CAN bus. Weight: 3.90 kg Max. torque:65 Nm Output: 250 / 350 W

REC REP BATTERY E-FAT-TAD LiON 48v/10.4Ah w/SMART-BMS/BLUETOOTH ***HAZMAT CLASS 9/UN3480/PG11/9*** HTS Number 8507.60.0020

Connect your PC to CycleOps VirtualTraining.

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Rambo replacement thumb throttle round 3 pin plug.

Ride an additional 20 miles on your electric mountain bike with a spare QuietKat battery! Our 48V 11.6ah rechargeable lithium-ion battery is at the forefront of green energy technology, with high-quality lithium-ion cells made by Panasonic. This battery fits our Bandit and Voyager electric bikes, as well as the 2016-2018 model year Apex, Predator, Warrior, Ambush, Ranger, and Rover electric bikes. - Weighs only 7 pounds - Rated for 800 charge cycles, equal to approx. 16,000 miles - High-quality lithium-ion Panasonic cells - Get up to 20 miles per charge

QuietKat Replacement Controller for 1000W Hub Drive Motor.

QuietKat Replacement Controller for 750W Mid Drive Motor.

QuietKat OEM Replacement Battery Charger (3 Pin) 54.6V~2.0A Charger Not Compatible with Legacy QuietKat E-Bike Models from 2014-2019 or Select 2020/2021 Models Compatible with the following QuietKat E-Bikes: 2020 Apex 750W & 1000W (Not Compatible with 1500W Model) 2020 Ranger 750W & 1000W 2020 Warrior 750W & 1000W

Extend your range and ride an additional 64 miles (estimated) on your electric mountain bike with a spare QuietKat battery! Our 16 amp hour rechargeable Lithium-Ion battery is at the forefront of green energy technology, with high-quality lithium-ion cells. The charger is sold separately.

Ride an additional 40 miles on your electric mountain bike with a spare QuietKat pathfinder battery! Our 11.6 ah rechargeable Lithium-Ion battery is at the forefront of green energy technology, with high-quality lithium-ion cells made by Panasonic. Weighs only 7 pounds Rated for 800 charge cycles, or approximately 16,000 miles High-quality lithium-ion Panasonic cells Ride up to an estimated 40 miles per charge Verify Compatibility Below: *2020/21 Apex 750w / 1000w (Not Compatible With 1500w) *2020/21 Ranger 750w / 1000w *2020/21 Warrior 750w / 1000w

- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove

CHARGER, 24V1.5A SLA,, XLR-3, Smart Std Monster Scooter Parts

Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Battery terminal RMB replacement part.