Parts & Kits

The M16 Central Motor series possesses a simple frame interface, integrated design and is compatible with several different battery types. Designed to hold the superior riding characteristics of a bracket motor with the competitive price of a hub-motor, the M16 series types are compatible with coaster breaks and equipped with an integrated RPM sensor and controller, making it ideal for entry-level riders. All M16 series Motors are provided with LogiX technology based on CAN bus. Weight: 3.90 kg Max. torque:65 Nm Output: 250 / 350 W

Replacement Charger for ALL Serial 1 (Harley Davidson) Ebikes.

The 706Wh lithium-ion battery is integrated into the lower frame for sleek style and convenient removal for off-the-bike charging. Depending on terrain, the RUSH/CTY Speed has a range of 25-115 mi/40-185 km and takes just 7.5 hours for a full charge. Battery 40 Cell / 706Wh 19.6Ah Spare/Replacement OEM battery direct from Serial 1. Pro Tip: You will need to charge the battery every 2-3 weeks weather you ride the bike or not. There is an onboard GPS tracking system that uses battery even when the bike is in storage. Not charging the battery regularly may result in totally depleting and damaging the battery. Removing the battery from the bike may reduce how often you need to charge it.

Rambo replacement thumb throttle round 3 pin plug.

Front Thru-Axle 15mm 195mm Coarse thread For Inverted Suspension Fork.

Front Thru-Axle 15mm 205mm Coarse thread For Inverted Suspension Fork.

Fits: Ibex, Apex Pro, Jeep, Rubicon Get more out of your favorite electric bike with a 29" swappable wheelset. Designed to get more range and acceleration out of your eBike while tackling less aggressive terrain compared to the standard 26"x4.8" tires.  Install Instructions: Tools required: chain whip, SRAM cassette tool, Torque wrench with a T25 torx bit, isopropyl alcohol, and cleaning rag Slide cassette onto freehub and start threading the cassette lock ring by hand Tighten the cassette lock ring using the cassette tool to ~40Nm Line up the brake rotor with the hole pattern on the hub ensuring that the text is facing outwards. Note that front and rear rotors are the same Insert and start threading in the 6 rotor bolts by hand Torque the rotor bolts to 6Nm using the torque wrench Be sure to clean rotors with isopropyl alcohol before use to avoid contaminating the brake pads Rear dropout/frame may need to flex in or out up to 8mm. (Not included extra brake rotors and cassette. You can use your original parts.)

Weight: 14 lbs Lifespan: 800 Cycles Capacity: 21AH | 48V Range: 32-63 Miles (est) Compatibility: 2022 Rubicon and Ibex E-Bikes

This part is no longer being manufactured. The new replacement part is 210000011325. This item may come with extra wires which can be discarded if you do not have brake sensors. Read and follow all MFG safety warnings before using this item.

Battery terminal RMB replacement part.

Button pad for iZip / Raleigh ebikes and eTrikes. Can be used with or with out brake sensor system. [This product is backwards-compatible with the old iZip 16 Button Pad #3 Part# 99-45-0079 UPC 791964521013, To use with older bikes you will not need to use the one set of wires to the brake levers.] Read and follow all MFG safety warnings before using this item.

Battery terminal 4 pin replacement part.

EnergyPak Plus 200Wh allows you to explore your world without the worry of running out of power. Take your E-bike rides further with a 200Wh range extender. 200Wh Range Extender Easy Assembly Lightweight 2.43lbs USB-C Charging Port Accessory Kit sold separately - SKU (700000069)

EnergyPak 6A Fast Charger

Replacement battery Terminal for Lafree. Measures about 47” from terminal block to the end of the red wire.

The Giant Speed Sensor ISS is suitable for Giant Reign E+, Trance E+, Intrigue E+ and Stance E+ models starting in 2020 with SyncDrive Pro mid-motor. With the help of the Giant Speed Sensor, the SyncDrive motor determines the speed of the rear wheel.

The Giant Speedsensor is suitable for all Yamaha mid-engines. With the help of the Giant speed sensor, the Yamaha motor determines the speed of the rear wheel. The function is comparable to the function of a bicycle speedometer, but specially adapted to the Yamaha engines. The following engines are compatible with the Giant Speedsensor: Yamaha PW engine Yamaha PW-SE motor Yamaha PW-X motor Giant SyncDrive Life motor Giant SyncDrive Sport motor Giant SyncDrive Pro motor.

Convert your Sun Baja Trike to Electric! Includes: Locking Parking Brake Levers 4-to-1 Accessory Cable (for connecting 2 brake levers) Throttle with Reverse 24" Fat Tire Wheel (built with rear direct-drive motor for use in 135mm front fork) Available with no battery for customers that want to use their own 36v or 48v battery. No Hazmat fee is charged when shipped without a battery. E-TrikeKit Adult Tricycle Conversion Kit with Heavy-Duty (Low Speed / High Torque) 500w Direct Drive Hub Motor 48 Volt Li-ion Battery Pack and Charger The E-TrikeKit electric tricycle conversion kit with a 48v lithium battery pack is specifically made with increased pulling power for heavier adult tricycles. The direct-drive hub motor is designed to deliver more low-end torque and a lower top speed; important for safety on a 3-wheeler. This premium system with a lithium battery gives high-end performance and longer overall battery life. Who's it for? This kit is built specifically for upright adult tricycles. The heavy-duty direct-drive motor is designed for increased torque and a lower top speed. This kit also has a speed-limited reverse (30% of forward top speed). The E-TrikeKit is designed specifically for adult tricycles. Upgraded in 2015 to include our LCD dashboard display, 48v 12FET controller, speed-limited reverse function, and locking e-brake handles, the system is easy to install and operate and gives the rider total control over top speeds and power output. This trike specific conversion kit allows you to turn any conventional 3-wheel adult tricycle into an electric-assisted adult mobility tricycle. System Specs Watts (Nominal/Peak): 500w / 750w (EBK 22Amp Controller) Top Speed: Approx. 14 Mph @ 48v in 26" Wheel (4 mph reverse) Range: 9-42 Miles (Based on rider's weight, input, and terrain contingent Charge Time: 3-5 Hours (From 0-100% and depending on battery choice) Weight: 5.8 lbs / 9.7 lbs / 14 lbs Performance: High Efficiency: Medium Stealth Factor: Low

48v 15Ah Li-ion Downtube E-Bike Battery UN 38.3 Certified Down tube Style Locking Key New 5-pin twist connector to connect to latest E-BikeKit Controllers. If your current controller has a 2 prong male connector, you will need an adapter. E-BikeKit 48v 15Ah Li-ion Downtube E-Bike Battery Pack. INCLUDES 3 AMP CHARGER These Li-ion batteries are our longest-lasting E-Bike battery with an expected 500-800 life cycles (from full to empty).

E-BikeKit Front 500-1000w Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions New Programmable LCD. The E-BikeKit is designed for convenience, performance, and reliability. With an LCD dashboard control panel and 48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36v and 48v battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit. Your choice of battery. Motor Specs: Type: Internally Geared (brushless, and disc brake compatible) Power: 500w Nominal / > 1000w @ 48v Max Torque: 84Nm @ 48v Max RPM: 320 @ 48v Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect Connector: Round 8-Pin 13/32" (10.4mm) Weight: 9.4 lbs (4.26 kg) Warranty: 1 Year (up to 48v - 300 lbs max load) Note: The geared 500w “Performance” motors feature an internal clutch to reduce drag, and can not read speed or mileage when not in use.

E-BikeKit Front 500-1000w Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions New Programmable LCD The E-BikeKit is designed for convenience, performance, and reliability. With an LCD dashboard control panel and 48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36v and 48v battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit. Motor Specs: Type: Direct-Drive (brushless, disc brake compatible) Power: 500w Nominal / > 1000 @48v Max Torque: 46N-m @48v Max RPM: 259 @48v Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect Connector: Round 8-Pin 19/32" (10.4mm) Weight: 12.8 lbs. (5.8 kg) Warranty: 1 Year (up to 48v - 600 lbs. max load)

Replacement charger for the Aventon Aventure ebike. Whether you're looking to replace a lost charger, have a spare at the office, or keep an extra at the vacation home. Aventon Part # 94931 or ECC004

Protect your Aventure & Aventure.2 ebike's battery with the battery cover kit! Whether you simply need a replacement battery cover or are buying a secondary cover to slide onto your spare battery. Match the color of the battery cover kit to the color Aventure ebike you own! Features Clear plastic protector to conceal battery and display battery light percentage Rubber charging flap to easily charge your ebike For use with Aventon Aventure e-bikes only

Protect your ebike display with this custom-fitted Aventon BC 280 display case. Easy to install and durable to the elements. NOT a universal display cover; This is for the BC 280 display only.